FB supply model MK II type 2
This model is almost identical to the type 1 unit,
except of mirrored component placements on the panel and chassis - and
slightly different +5V/-5.2V switching supplies.
Front panel
The front panel contains a voltmeter (0-30V) with an adjacent 5-position
turn-switch to visually monitor each of the output voltages. Green LEDs
at the 5 switch positions indicate whether the outputs are active or not.
A second meter shows the current (0-300A) of one of the high-current DC
outputs, selected by a 3-position switch below.
8 LEDs are for the status display of the control power, interlocks, and
main power. Next to them is a push-button for resetting the unit, and
below a control power switch and two pushbuttons for ON and
OFF of the main power.
(also as postscript file available)
Component placements on the chassis
See also the block diagram, and the
schematics pages.
(also as postscript file available)
back to the main page.